Pontoon boats are a great way to enjoy the water and have fun on your own time. But you need to make sure that you anchor the boat in the correct location. You don’t want it to move around frequently. The best location to install an anchor on a pontoon boat is at least 100 feet away from any bank or shoreline. This will allow enough room for waves and currents, which can cause problems with an anchored pontoon boat.
Pontoon boat anchors are great because they allow you to anchor your pontoon boat in a wide variety of locations. They can be used on sand, mud, gravel, or solid ground and will provide the same level of security. To determine which type of pontoon boat anchor is best for your needs, it’s important to consider the location where you plan on anchoring your pontoon boat most often.
Different types of anchors for pontoon boat
Before looking for a suitable location to install an anchor for a pontoon boat, you should know about the different types of anchors available in the market. There are two major categories of anchors-
- A plow pontoon boat anchor is a type that has three arms with a triangular or square head.
- The other category includes grapnel and claw-style anchors, which have long shanks for penetrating thick weed beds or tough bottoms.
Now, let’s discuss the different parts and features needed to install an anchor on a pontoon boat.
An external mount requires drilling into fiberglass pontoons. It uses threaded bolts with nuts to secure it from within the boat through one of three pre-drilled holes.
Step by step guide to install an anchor
At first, you need to make sure that your boat is facing towards the right direction of the wind.
Then, you need to make sure that the anchor is dropped in deep enough. Next, attach the rope and pull it up so that the anchor will be pulled into place with a large amount of tension on its line. Make sure there are no knots or twists present as they can impede an easy release from your boat’s deck.
Video Credit: LakeHickoryScuba
Lastly, carefully give slack until you feel satisfied with how far away your boat is positioned from where you want it to stay set anchored down.
How to choose the right direction for installing an anchor?
A quick way to figure out the best direction for installing an anchor is by flipping your boat upside down. The point where you would most want it to stay anchored in place should be directly below.
If there’s any excess length in the line after all this, tie off one end at least every five feet (or more often if needed) so that when it comes time for raising again, those loops won’t become entangled around anything else on board; or alternatively, raise and lower a few times before tying off! This will help assure the knot doesn’t slip while under tension as well, which can happen when using nylon cordage such as a Polyester Rope. Once everything is set up correctly and securely.
With an electric anchor winch, it is much easier to find out the best location for installing an anchor.
What is an underdeck winch?
If you have an underdeck winch, you may want to install it on the aft deck. An anchor winch is best installed in close proximity to the bow so that you can guide your boat by dragging the anchor across a sandy bottom with ease.
If you live near sandbars and mudflats, an underdeck winch might be ideal for the best location installing a pontoon boat’s anchor- as when fishing or crabbing at low tide. If there are no snags around, then this will also make deploying an emergency anchoring system easier too; though if any such hazards do turn up while running without one of these setups (such as other boats), then consider skipping over them unless absolutely necessary.
The type of gear used for securing anchors would depend on the boat. Having a pre-installed anchor gives you the most flexibility and is best for those who make anchorages a routine.
Things you should know while finding out best location to install an anchor on a pontoon boat
Underdeck winch might be ideal for the best location installing a pontoon boat’s anchor – as when fishing or crabbing at low tide. If there are no snags around, then this will also make deploying an emergency anchoring system easier too; However, if any such hazards do turn up while running without one of these setups, such as other boats, then consider skipping over them unless absolutely necessary!
The type of gear used for securing anchors would depend on the boat. Having a pre-installed anchor gives you the most flexibility and is best for those who love to go out for fishing even in extreme weather conditions.
If you are an average boater, then the best place for installing an anchor is in the bow. This can be done by mounting it on a bracket that has been previously fitted to take one or more of these anchors.
The best location to install an anchor should also depend on what type of boat do you own – any fishing boats would need some sort of winch as well as through deck tackle, while smaller recreational (pontoon) vessels may not require such equipment and could instead just use pre-installed roof mounted hardware!
Conclusion
So, where do you want to install your anchor now?
An anchor is a device, typically made of metal, used to connect a vessel to the bottom of a body of water. It provides resistance against wind and current that can push it off course or cause motion in still waters. Pontoon boats are usually anchored by tying lines around an object on shores such as piling, small rocks, or tree roots.
The best location for installing an anchor depends on what type of boat you have like- fishing or recreational. Fishing vessels need anchors with winches, while smaller pontoon boats may not require these pieces of equipment because they won’t be out fishing all day long. In general, though- make sure wherever you decide to install, your anchor has plenty of depth below the surface, so there’s no risk.
